• Home
• Sign up
• Log In
• Articles
• Teams
• Sponsors
• Forums
• Support
• Donate
• Links

1: Make sure you go to the right tank filler. if you have a 3000psi tank go to the one that says 3000 on it... if you have a 4500 go to the one that says 4500

2: Once you have found the right filler for you, pull the fitting back on the hose that fills your tank.

3: While holding the fitting, line the hose up with the fill nipple on your tank

4 :Push the hose all the way down on the fill nipple until u are sure it will not go any farther

5: Release the fitting

6: Grip the hose, gently pull on the hose to make sure it is locked on your nipple. (if the hose isnt connected to your fill nipple correctly and you start to fill it, it will make a loud hissing sound)
7: Press and hold the large button.

8: You will see the gauge on the station and your tank gauge increase. The station will stop on its own once the designated pressure has been met.

9: If you have done everything correctly your tank is now filled.

- Jeremy Patterson
March 12, 2006
Edited by Paul Silvis

- Return To Main -

Submit an Article of your own!